3. ADJUSTMENT
3-4
3.3 Setting for External Equipment
Do the following settings depending on the external equipments connected. Open the
System menu referring to the previous page.
EXT KP SYNC
Select using or not using the external keying pulse (See “Synchronizing Transmission
with Other Equipment” on page 2-15.)
1. Rotate the [RANGE] control to select EXT KP SYNC.
2. Rotate the [GAIN] control to choose OFF or ON.
OFF: Not using the external keying pulse.
ON: Using the external keying pulse.
**
SYSTEM MENU
**
(RANGE CTRL: U/D, GAIN CTRL: L/R)
[MENU MODE] : SONAR SOUNDER MARKS SYSTEM
DIMMER : 10
DISP SELECT : TEMP CURRENT
HEADING ADJ : 0°
AUTO RETRACT : OFF (OFF, 5-16kn)OFF
SPEED MESSAGE : ON OFF
EXT KP SYNC : OFF
ON
AUTO TRAIN SPD : LOW HIGH
AUTO TILT SPD : LOW HIGH
UNIT : METERS FEET FATHOMS PA/BRA
SHIP'S SPD/BR :
LOG/GYRO
CURRENT NAV DATA
GYRO+NAV
LOG PULSE : 200 400
PORT1 BAUDRATE : 19200 9600 4800 2400
PORT1 FORMAT : NMEA CIF
PORT2 BAUDRATE : 19200 9600 4800 2400
PORT2 FORMAT : NMEA CIF
NAV DATA : GPS LC DR ALL
COMBI SCALE : RIGHT LEFT
SUB TEXT INDI : OFF ON
LANGUAGE : ENGLISH ESPANOL DANSK
NEDERLND ITALIANO
NORSK VIET
INDONESIA
ACTIVATIONCODE : EXECUTE
TEST : SINGLE CONTI PANEL COLOR
: PATTERN SIO ECHO-1 ECHO-2
ECHO-3 ECHO-4
SET TO DEFAULT :
EXECUTE
PRESS [MENU] KEY TO EXIT
= Items should be set after the installation.
To Next Page
Loading...
