Furuno FA-100 - Setting; Setting on FA-100; Setting on FEA-2105

AP6.3 Setting
AP6.3 Setting
AP6.3.1 Setting on FA-100
Press [MENU][6][1][1] and set “I/O SPEED” to 38.4 k.
Port I/O SPEED Port I/O SPEED
PC I/O 38.4 k LR
*
38.4 k
SNSR 1 4800 BCON 4800
SNSR 2 4800 EXTRA 1 38.4 k
SNSR 3 4800 XTRA I/O 4800
Note: When FEA-2105 is connected to L/R port, “I/O FUNCTION” of LR port is set to
“PORT LR: EXT DISP”. Keystroke: [MENU][6][1][2]
AP6.3.2 Setting on FEA-2105
1. Insert the “KEY disk” to the floppy drive.
2. Press “INITIAL SETTING” twice and “INITIAL SETTING” window appears.
Fig.3.4
Set time
Parameter Backup
Digitizer
Backup and Restore
Installation Parameter
Navigation Parameter
Chart Alarm Parameter
Optimization Parameter
Print Navigation Parameter
Print Optimization Parameter
Selftest
Presentation library
Access server and Diagnostic

AP6-9