AP6.3 Setting
AP6.3.3 Displaying AIS target
1. Press [CHART DISPLAY] on FEA-2105. The following “Chart display” window
appears. If not, move the pointer onto the “Tracking” and press [SELECT].
Chart display
Chart Standerd Other
Tracking Mariner Route
Past tracks
Off Std Other
Ship System
Ship Primary
Ship Secndery
ARPA target
Length 20 min Labels 5 min
Length 20 min Labels 5 min
Predictor ship 30 sec
User Events
Automatic Events
Positions
Show Not older than 3 month
Radar Overlay
ARPA target
AIS targets
AIS target names
Max. count 200 Max. range 48 nm
Ship true symbol scale 1:50000
Off Std Other
2. Set “AIS target” and “AIS target names” lines, Max. count and Max. range.
AIS target
Move the pointer onto “Std” on AIS target line and press [SELECT] to turn on
AIS target display.
- Off : AIS target display is off
- Std : AIS target display is on
- Other: AIS target is on until [STANDARD] is pressed. when [STANDARD]
is pressed, AIS target is off.
AIS target name
Move the pointer onto “Std” on AIS target names line and press [SELECT] to
turn on AIS target name.
- Off : AIS target has no ship’s name.
- Std : AIS target has ship’s name.
- Other : AIS target has ship’s name until [STANDARD] is pressed. When
[STANDARD] is pressed, ship’s name disappears.
AP6-12
To Next Page
Loading...
