1. OPERATION
1-19
Sensor priority
When the signal is not received from the sensor, if the multiple sensors are connected,
the sensor in use is switched according to the priority shown as the table below.
1.8.6 Alert display
The alert display shows the date and time alerts were generated. For further details,
see section 3.5.
[IDENTITY] [MMSI] Own ship’s MMSI.
[NAME] Own ship’s name.
[IMO NO.] Own ship’s IMO number.
[CALL SIGN] Own ship’s call sign.
[TYPE OF SHIP] Own ship’s vessel type. See section 1.6,
step 7 for details.
[SCALE] [SHIP SIZE] Own ship’s length and beam.
[ANT POSN] Antenna position.
[INTERNAL]: position of internal antenna.
[EXTERNAL]: position of external antenna.
[DRAUGHT] Own ship’s draught.
Priority Sensor in use Indication on [SENSOR] tab
High
Low
1 External DGNSS in use (corrected) EXTERNAL DGPS
2 Internal DGNSS in use (corrected;
Message 17)
INTERNAL DGPS
3 Internal DGNSS in use (corrected;
beacon)
4 External EPFS in use (uncorrected) EXTERNAL GPS
5 Internal GNSS in use (uncorrected) INTERNAL GPS
6 No position NO FIX
Tab Item Description
OWN INFORMATION
: TAB : NEXT
DISP
SENSOR VOYAGE IDENTITY SCALE
UTC
12/NOV/2014 17 :20 :00
34 º 44 .5000 ´N
130 º
135 .0º
135 º 21.3000 ´E
108 . 7 º/min ( )
10 .0 kn
HIGH
UNUSED
POSN PA
RAIM
HDG
COG
ROT
SOG
EXTERNAL
DGPS
Sensor in use
To Next Page
Loading...
