EasyManua.ls Logo

Furuno FA-170 - 1 Transponder Unit; 2 Monitor Unit; 3 GPS Receiver; 4 Interface

Furuno FA-170
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FURUNO
FA-170
SP - 1 E4490S01G
160415
SPECIFICATIONS OF U-AIS TRANSPONDER
FA-170
1 TRANSPONDER UNIT
1.1 TX/RX frequency 156.025 MHz to 162.025 MHz
1.2 Class of emission F1D, F2B
1.3 Output power 1 W or 12.5 W selectable
1.4 Impedance 50 ohms
1.5 DSC receiver CH70 fixed, 156.525 MHz
1.6 Bandwidth 25 kHz
2 MONITOR UNIT
2.1 Screen 4.3-inch color LCD, 480 x 272 dots (WQVGA)
2.2 Brilliance control 18 steps
2.3 Visible distance 0.7 m nominal
2.4 Buzzer volume 75 to 85 dB (A)
3 GPS RECEIVER
3.1 Receiving frequency 1575.42 MHz
3.2 Tracking code C/A code
3.3 Number of channel 12 channels parallel, 12 satellites
3.4 Accuracy (dependent on ionospheric activity and multipath)
GPS 13 m max. (2drmsHDOP < 4)
DGPS 5 m max. (2drmsHDOP < 4)
3.5 Tracking speed 1000 kn
3.6 Position fixing time Warm start: 12 s, Cold start: 90 s
3.7 Position update interval 1 second typical
3.8 DGPS data receiving RTCM SC-104 ver-2.1
4 INTERFACE
4.1 Number of ports
Serial 6 ports, IEC61162-1 Ed.4 or IEC61162-2 Ed.1
Sensor input 3 port, IEC61162-1 Ed.4, 4800 bps
Alarm I/O 1 port, Contact closure (normal close or open),
Output level: 50 V, 80 mA max.
LAN 1 port, Ethernet, 100Base-TX, RJ45 connector, Auto MDI/MDIX,
for IEC61162-450 Ed.1
BLUESIGN input 1 port, Relay contact
4.2 Data sentences IEC61162-1/2/450
Input ABM, ACA, ACK, ACM, ACN, AIQ, AIR, BBM, DTM, EPV, GBS,
GGA, GLL, GNS, HBT, HDT, LRF, LRI, OSD, PIWWIVD,
PIWWSPW, PIWWSSD, PIWWVSD, RMC, ROT, SPW, SSD, THS,
VBW, VSD, VTG

Table of Contents

Other manuals for Furuno FA-170

Related product manuals