2. INLAND AIS OPERATION
2-2
2.2 Selecting AIS Mode
The Inland AIS has two operating modes: Inland (inland waterways) and SOLAS (SO-
LAS compliant class A AIS transponder). Select desired mode as follows:
1. Press the NAV STATUS key to open the [NAV STATUS] menu.
2. Press T to select [AIS MODE] then press the ENT/ACK key. The mode selection
pop up window appears.
3. Select [SOLAS] or [INLAND] as appropriate then press the ENT/ACK key. The
AIS mode icon at the top of the screen changes to display the selected mode.
You are asked if you are sure to reboot the system. Select [YES] then press the ENT/
ACK key to reboot the unit.
Notes on Inland AIS operation
• IMO No. is transmitted with all zeros.
• The draught used in Inland AIS is “Inland draught”.
NAV STATUS
: TAB
: SELECT:
CURSOR
ENT
VOYAGE
SHIP’S
INFO
SCALE
NAV STATUS
DESTINATION
ETA
(
UTC
)
AIS MODE
DYNAMIC INFO RATE
PWR-DRIVEN VESSEL PUSHING
AHEAD OR TOWING ALONGSIDE
KOBE
[
SOLAS LIST
]
SOLAS
AUTO
[
INLAND LIST
]
10 / MAY 10 : 51
12
:
:
:
:
:
Inland mode active SOLAS mode active
To Next Page
Loading...
