Furuno FA-170 - Page 51

2. INLAND AIS OPERATION
2-7
24. Press X to display the [SCALE] tab.
25. Referring to the table below, input the length and beam of your vessel and the con-
voy vessel. The values are displayed as decimeters.
Press the arrow keys to move the selection cursor and highlight the item you wish
to edit, then press the ENT/ACK key. A numerical input pop up window appears
for the selected item.
26. Select [DRAUGHT], then press the ENT/ACK key to display the
[DRAUGHT] setting pop up window. The setting range is [0] cm
to [2000] cm.
27. Input the draught, then press the ENT/ACK key.
28. Press the DISP key to close the menu.
NAV STATUS
: TAB
: SELECT:
CURSOR
ENT
VOYAGE
DRAUGHT
SHIP’S INFO SCALE
EA
:
[
CONVOY EXTENSION
]
0000dm
EB
LS
LC
:
0000dm
:
0000cm
0dm
0dm
0dm
0dm
ED
BS
BC
:
0000dm
EC
:
0000dm
1
2
0dm
ED
BS
:
0000dm
EC
:
0000dm
EA
:
0000dm
EB
L
S
:
0000dm
0dm
Convoy
layout
Own vessel and convoy
vessel lengths
Own vessel and convoy
vessel beams
Own ship
draught
LC
LS
EA
EB
BSEC ED
BC
Own
ship
Convoy
vessel
Convoy
vessel
Convoy
vessel
Menu
item
[EA]
[EB]
[EC]
[ED]
[LS]
[BS]
[LC]
[BC]
Description
Length of convoy vessel A.
Length of convoy vessel B.
Beam of convoy vessel A.
Beam of convoy vessel B.
Own ship length. (Display only,
not available for input.)
Own ship beam. (Display only, not
available for input.)
Shows the total length of the convoy.
(Display only, not available for input.)
Shows the total beam of the convoy.
(Display only, not available for input.)
0000
[
0 , 2000
]
DRAUGHT