2. INLAND AIS OPERATION
2-17
How to send an ETA message
1. Press the MENU/ESC key to open the menu.
2. Select [MSG], then press the ENT/ACK key.
3. Select [ETA/RTA], then press the ENT/ACK key.
4. Select [NEW MSG], then press the ENT/ACK key.
5. [TO] is selected. Press the ENT/ACK key. to display the MMSI settings pop up
window.
6. Enter the MMSI of the lock/bridge/terminal you want to pass through then press
the ENT/ACK key.
7. Select [CH], then press the ENT/ACK key.
8. Select the channel over which to send the message then press the ENT/ACK key.
9. Select [RETRY], then press the ENT/ACK key. The retry attempts setting pop up
appears.
10. Press S to increase the retry attempts, T to decrease the retry attempts. The
maximum setting for retries is 3. Press the ENT/ACK key to apply the setting and
close the pop up.
11. Select [DESTINATION] then press the ENT/ACK key. The [INLAND DESTINA-
TION LIST] appears.
ETA/RTA
NEW MSG
MSG BOX
1
2
The [NEW MSG] option in the [ETA/RTA]
pop up window is not available for selection
in [SOLAS] mode.
NEW MSG
(
ETA
)
<SEND MSG>
: CURSOR
: SELECT
000000000
: BACK
ENT
MENU
:
TO
CH
RETRY
DESTINATION
COUNTRY CODE
FAIRWAY NO.
FAIRWAY HECT
ETA
[
UTC
]
AIR DRAUGHT
NO. OF TUGBOATS
:
ALTERNATE
:
:
:
:
:
3
DE
DE
LOCATION
CODE
TRI
11111
TERMINAL
CODE
01234
56789
12/
MA
Y
0 .0cm
0
12:32
TRI
01234
11111
56789
CH
BOTH A & B
ONLY A
ONLY B
ALTERNATE
Sends the same message to both channel A and channel B.
Sends the message to channel A. If channel A is set to RX
only and channel B is set to TXRX, the message is sent to
channel B.
Sends the message to channel B. If channel B is set to RX
only and channel A is set to TXRX, the message is sent to
channel A.
Sends messages on alternating channels. In other words, if the last message
sent on channel A, the next message is sent on channel B.
INLAND DESTINATION LIST
<EDIT>
DE TRI 01234 11111 56789
00000 00000
00000 00000
00000 00000
00000 00000
00000 00000
00000 00000
00000 00000
07
06
05
04
03
02
01
08
INLAND DESTINATION
<COPY>
CURSOR
EXEC FUNC
BACK
<PASTE>
<CUT>
<SET>
01 / 20
ENT
MENU
To Next Page
Loading...
