APPENDIX 2 ALERTS, IDS, MEANINGS AND MEASURES
AP-9
Note 1: The Alert IDs listed in parentheses are output when the FA-170 is connected to a BAM
(Bridge Alert Management) system.
Note 2: Alert ID 600950 is only output when a BAM (Bridge Alert Management) is connected and
is given “Caution” priority level.
Note 3: Where the [ALERT MODE] is set to [Legacy Ed.1/Ed.2], alert priority level for all alerts is
fixed at “Warning”.
Note 4: Where the [ALERT MODE] is set to [ALERT IF1] or [ALERT IF2] the alerts shown with “*
1
”
in the table above are assigned “Caution” priority level.
026
(526)
NO POSITION SEN-
SOR IN USE
Warning No position data avail-
able.
Check connection to
sensor.
029
(529)
NO VALID SOG IN-
FORMATION
Warning SOG information is in-
valid.
030
(530)
NO VALID COG IN-
FORMATION
Warning COG information is in-
valid.
032
(532) *
1
HEADING LOST / IN-
VALID
Caution HDG information is lost
or
invalid.
035
(535) *
1
NO VALID ROT INFOR-
MATION
Caution No ROT information
available.
600950*
1
BAM COM ERROR Caution Communication failure
between the BAMS and
the transponder unit.
Check connection be-
tween unit and BAM.
Alert ID
Displayed message Priority Meaning Measures
(BAM ID)
To Next Page
Loading...
