1. MOUNTING THE UNIT
7
1.2 Communication Unit
Mounting
Select the following place to mount the communication unit.
• Provide sufficient ventilation.
• For maintenance and checking purpose, leave sufficient space at the sides and rear of
the unit.
Use two tapping screws (4x40, supplied) to fix the communication unit. You can insert
screws from the top and bottom side of the communication unit for bulkhead mounting.
After the screwing, attach the cosmetic caps (2 pcs, supplied) to fixing holes to cover the
screw head.
184 + 0.5
72.5 + 0.5
2- 4.5
Fixing hole
Communication unit, dimensions
1.3 AC/DC Power Supply Unit PR-240 (option)
Fix the unit on a table with four tapping screws (4x16).
272 + 1
100 + 1
4 - 6
AC/DC power supply unit, dimensions
To Next Page
Loading...
