6. WEB FUNCTIONS
6-17
Entry screen/Edit screen
Group setting screen (TCP/IP)
Click [TCP/IP] on the group setting screen to show the TCP/IP setting screen. Set the
connection destination for each provider service.
Item Description
Group Display group name.
User Enter, change IP address (127.0.0.1, 255.255.255.255; must be differ-
ent from IP address of communication unit).
Note: if the IP addresses are the same, only one group can be regis-
tered. “192.161.1.*” and “192.168.1.10” can be registered. * is a wild-
card: show network. If you registered two groups this way, the group
having the narrowest range (192.168.1.10) has priority.
Add button Register the information set. The group setting screen appears.
Save button Save the information. The group setting screen appears. During PS,
change is reflected the connection is reestablished.
Cancel button Return to the group setting screen
Item Description
APN • Use connection destination registered in the SIM card
(checkmarked [9] items).
• Use ASC II characters (other than “, ’) for the names of con-
nection destinations (maximum 63 characters).
User account for APN Enter username specified by provider (maximum 29 charac-
ters). Ok to leave blank.
Password for APN Enter password specified by provider (maximum 29 charac-
ters). Ok to leave blank.
IP address (Global) • Choose the method for obtaining IP address (Automatic,
Manual).
• If Manual is selected, enter the IP Address (IPv4 address).
Entry screen Edit screen
To Next Page
Loading...
Need help?
General
