2.6 Terminal unit, IB-583
2-25
Fig.2.6.3 Terminal unit with cover removed
Note 1) Disconnecting flat cable from J6
To disconnect the flat cable, gently, set the locking tab to vertical position and then pull
out the cable from the connector. Excess force will damage the connector tab. To
connect the cable, reverse the above procedure.
TERM CPU (16P0209A)
PWR (16P0211A)
PWR C (16P0214)
FDD (JU-226A032FCK2149)
PRINTER
JUNCTION
(Not provided on IB-583 )
DTE
J6 (See note 1.)
J9 (See note 2.)
FDD connecter
See note 3.
Fig.2.6.4 Flat cable connector, J6
p.c.b
J6
Flat cabl
gently
To Next Page
Loading...
