3.3 DSC SETUP
3-18
UNABLE REASON
This setting is valid when COMPLY TYPE is set to “UNABLE”. Selectable are;
No reason, Busy, Equip disable, Mode not usable and CH not usable.
POSITION CALL
Position request call function is switched on or off. No ACK is sent when Comply Type
is set to “unable”. See table 3.3.3.
POLLING CALL
Position call function is switched on or off. No ACK is sent when Comply Type is set to
“unable”. See table 3.3.3.
Table 3.3.3 POSITION CALL and POLLING CALL settings
AUTO ACK
AUTO
Setting
ABLE UNABLE
MANUAL
ON Yes No No POSITION
CALL
OFF No No No
ON Yes No No POLLING
CALL
OFF No No No
3. ERASE
Log files and Send message file in “Erase file” menu can be erased. Note that all files in
the specified log type are erased. The next page describes how to erase the file
individually.
To erase log files;
1. Move the cursor over the desired log.
2. Press [ENT].
3. Select “yes” in the “Are you sure?” prompt.
4. Press [ENT].
To Next Page
Loading...
