3.3 DSC SETUP
3-20
4. MESSAGE
A maximum of 150 messages can be created and reedited through this menu. A file is
selected for transmission by using [*FILE]. The table below lists the creatable
messages.
Table 3.3.4
Call type Category Communication type
INDIVIDUAL CALL ROUTINE TEL, ARQ, FEC-S
PSTN CALL ROUTINE
—
GROUP CALL ROUTINE TEL, FEC-C
AREA CALL ROUTINE TEL, FEC-C
TEST CALL SAFETY
—
Figure below shows “Message file entry” menus: the first page (left) and the second
page (right). The “FILE NAME” is 16 character long. The “FILE NUMBER” is any
number between 001 and 999 except 800 to 899.
At the end of the message creation, the following prompt is displayed.
If you enter a file number (name) that already exists, you will be prompted to overwrite
that file.
To Next Page
Loading...
