Furuno FS-1570 - Page 77

3.3 DSC SETUP
3-21
Note 1)
Table 3.3.5 lists the outline of the “Message file entry” for different call types.
Table 3.3.5 “Message file entry” Menu tree
Call Type Item Options Data to be input
STATION ID xxxxxxxxx
TELEPHONE
NBDP-ARQ
COM.TYPE
NBDP-FEC
NO INFO
TX: 12345.6 kHz
FREQUENCY
RX: 12345.6 kHz
CHANNEL ITU/USER CH
COM.FREQ
POSITION Own ship position is displayed.
2 MHz
Select a DSC frequency from INTL and USER
CH frequencies.
4 MHz to 25 MHz
INDIVIDUAL
DSC FREQ.
OTHER
Select a DSC frequency from INTL, LOCAL-1,
LOCAL-2 and USER CH frequencies.
COST ID 00xxxxxxx Two leading zeros is entered automatically.
TEL No.
xx—xxx
(Max.16 digits)
2 MHz
4 MHz to 25 MHz
PSTN
DSC FREQ.
OTHER
Select a DSC frequency from INTL and USER
CH frequencies.
GROUP ID 0xxxxxxxx One leading zero is entered automatically.
TELEPHONE
COM.TYPE
NBDP-FEC-C
NO INFO
TX: 12345.6 kHz
FREQUENCY
RX: 12345.6 kHz
COM.FREQ
CHANNEL ITU/USER CH
2 MHz
4 MHz to 25 MHz
GROUP
DSC FREQ.
OTHER
Select a DSC frequency from INTL and USER
CH frequencies.
AREA
N(S)/E(W),
Area assignment
TELEPHONE
COM.TYPE
NBDP-FEC-C
NO INFO
TX: 12345.6 kHz
FREQUENCY
RX: 12345.6 kHz
COM.FREQ
CHANNEL ITU/USER CH
2 MHz
4 MHz to 25 MHz
AREA
DSC FREQ.
OTHER
Select a DSC frequency from INTL and USER
CH frequencies.
COST ID 00xxxxxxx
TEST CALL
DSC FREQ.
2187.5 to
16804.5
Select a 2 to 16 MHz distress/safety
frequencies.