4-4
4. Use the 17JE-573-10 to connect the NBDP port of the control unit and COM1 port of the
NBDP terminal unit.
Keyboard
1. Attach the labels for NBDP and the compass safe distance to the appropriate locations
shown below.
Label for key operation for
FUNCTION KEYS (supplied)
LABEL FOR COMPASS SAFE DISTANCE
(supplied)
2. Attach four fasteners (small, supplied with the optional kit) to the bottom of the keyboard.
3. Attach four fasteners (large, supplied with the optional kit) to the small fasteners used in
step 3.
4. Peel the paper from four fasteners.
5. Mount the keyboard on the location selected, and then fix it.
To Next Page
Loading...
