Furuno FS-2570 - Check List; 1. Check of Installation; 1.1 System Configuration Understanding; 1.2 Mounting and Wiring Checks

1-1
1. MOUNTING
1.1 Control Unit
1.1.1 Mounting methods
The control unit can be mounted one of four ways;
• In the hanger (overhead, bulkhead or tabletop)
• Flush mounting.
1.1.2 Mounting considerations
• Make sure the location is strong enough to support the unit under the conditions of
continued vibration and shock normally encountered on the boat
• Locate the unit where it is easily accessible and does not interfere with personnel or
operation of other equipment; for example, ship’s wheel.
1.1.3 Hanger mounting
1. Fix the hanger with tapping screws (supplied).
2. Set the control unit to the hanger and fix it with the washers and knobs.
135
110
100
80
80
220±0.5
258
50.5±0.5
108
110
Mounting the control unit