Introduction to the built-in web interface
5-2
Figure 5-1: LAN connector used for configuring the FV-110
3. Open your Internet browser and enter the IP address of the ACU. The default IP
address is http://192.168.0.1.
4. The web interface shows the DASHBOARD page.
When the Dashboard is displayed you have verified that the connection to the FV-110 can
be established. The web interface is ready for use. You can continue to configure the
system.
If you cannot establish a connection there might be problems with the Proxy server
settings of your PC. See Proxy server settings in your browser on page 5-18 for further
information. For a detailed introduction to the web interface see Overview and dashboard
on page 5-16. If you want to use another LAN port you must configure it according to
your network requirements. For information how to configure the LAN connectors see To
configure the LAN network on page 5-29.
For a detailed introduction to the web interface see Overview and dashboard on page 5-
16.
Figure 5-2: FV-110 Dashboard
To Next Page
Loading...