Furuno GP-1670F Installation Manual

2. INSTALLATION OF TRANSDUCERS
2-6
5. Attach the transducer to the hull.
Press the transducer firmly down on the hull
and gently twist it back and forth to remove
any air which may be trapped in the silicone
sealant.
6. Support the transducer with a piece of wood
to keep it in place while the sealant is drying.
It takes 24-72 hours to harden completely.
Hull
Silicone
Sealant

Furuno GP-1670F Specifications

General

Brand	Furuno
Model	GP-1670F
Category	GPS
Language	English