H
harrisonandrewAug 28, 2025
Why is my Furuno Plotter position not fixed after 90 seconds?
- PphillipfosterAug 29, 2025
If your Furuno Plotter position isn't fixed within 90 seconds: Check that the antenna connector is tightly fastened. Check the number of satellites received on the GPS Status Display. Verify if [POSITION&SOG/COG] in the [SELECT INPUT DEVICE] menu in the [INTERFACE] menu is set to [Internal GPS]. Execute [RESTART GPS] in the [INTERNAL GPS SETUP] menu in the [SYSTEM] menu.













