12. INSTALLATION
12-6
3. Time fed from the internal GPS navigator is UTC time. If you would rather use lo-
cal time, follow the steps below to enter the time difference between your time and
UTC time. Otherwise go to step 6.
1) Tap [Time Offset] to show the time offset menu.
2) Tap [UTC+00:00]. The time setting screen appears.
3) Tap to select plus or minus. + sign if your time is ahead of UTC, or - sign
if your time is behind UTC.
4) Tap or to select the hour digit or minute digit.
5) Tap or to change the hour and minute.
6) Repeat steps 4) and 5).
7) Tap [Enter] to finish.
4. When you are using the optional antenna unit GPA-017, tap [GPS Antenna] and
select [External].
5. Tap [Finish Installation].
To Next Page
Loading...
