8. MEMORY CARD OPERATIONS
8-2
8.3 How to Eject an SD Card
To prevent loss of data on an SD card, eject the SD card from [Menu].
Open [Menu] and tap [Eject SD].
8.4 How to Save Data to an SD Card
1. Open [Home] and tap the [General] menu icon.
2. Tap [Memory Card] to show the [Memory Card] screen.
3. Tap [Save] (at the bottom of the screen) to show the [Save Point] window.
4. Tap [Name] to change the file name. The default file name is FILExxxx(xxxx=next
sequential file number). Use the Character pad to change the name if desired.
5. Tap [Type] to select the file type. You can select the file type from [Points+Routes]
and [Tracks]. All data for the selected file type are saved.
6. Tap [Save].
7. When the saving is completed, the message "Completed to save." appears. Do
not remove the card until the saving is completed.
8. Remove the card and close the cover.
To Next Page
Loading...
