10. CUSTOMIZING YOUR UNIT
10-3
10.3 System Menu
Open [Home] and tap the [System] menu icon to show the [System] menu.
[Language]: Select the language to use, among English and Asian languages.
[Units of Measure]: The default units of measure are based on the language select-
ed. However, you can freely set the units of measure for distance, speed, depth and
temperature.
[GPS Position]: Adjust the GPS position.
[GPS Calibration]: To activate the [Position Calibration by Cursor] and [Position Cali-
bration by Value], select [On].
[Position Calibration by Cursor]: You can adjust the GPS position from the plotter dis-
play. Tap [Position Calibration by Cursor] and the plotter display appears. Tap the plot-
ter display to scroll if necessary and long tap the location where you want to put the
Item Available units
[Distance] nm, sm, km, nm+ft, nm+m, sm+ft
[Speed] kn, mph, km/h
[Depth] m, ft, fm, pb
[Temperature] °C, °F
To Next Page
Loading...
