7-1
7. VISUAL ALARMS
The plotter section has seven alarm settings that release audiovisual alerts when the
specified conditions are met. These are
When an alarm condition is met, the alarm sounds, and a relevant pop-up and alarm
icon (flashing at the upper left-hand position) appear. (See the Appendix for a list of
the alarm icons.) You may silence the alarm by tapping the pop-up window. An alarm
icon remains on the screen until the corresponding alarm is deactivated or the reason
for the alarm is gone.
7.1 Alarm Menu
Open [Home] and tap the [Visual Alarm] menu icon to show the [Visual Alarm] menu.
• Arrival Alarm
• XTE Alarm
• Shear Alarm
• Depth Alarm
• Anchor Alarm
• Trip Alarm
• Speed Alarm
To Next Page
Loading...
