1. OPERATIONAL OVERVIEW
1-6
1.4 Plotter Display
The plotter provides a small world map. The plotter receives position information from
the internal GPS receiver. Your position is marked on the screen with the own ship
icon. Waypoints and routes you have entered are shown on the display.
The plotter display also
• Plots the track of your vessel.
• Measures distances and bearings.
• Marks man overboard (MOB) position.
• Controls alarm functions.
• Follows routes.
• Puts points.
Item Description Reference
Compass Find a direction.
GPS icon Shows GPS status. page AP-6
Alarm icon Appears when an alarm condition(s) is met. page AP-6
Point Displayed where you have entered a point. chapter 3
Cursor Displayed where you tapped. section 1.6
Cursor position box Shown when the cursor is present. section 1.6
Own ship icon Shows the own ship's position. section 1.7
Track Your boat's track. chapter 2
COG line Shows the own ship direction.
MOB mark Shows man overboard position. section 1.12
MOB box Shows bearing and distance to MOB mark. section 1.12
Range scale Tap to change the range scale. section 1.8
Range scale
Cursor
COG line Navigation
data box
L/L grid
Track
Alarm icon
Cursor
position
box
MOB mark
[Home] key
[Menu] key
[Point] key
[Center] key
Own ship
icon
Point
Compass
MOB box
(Bearing and distance
to MOB position)
GPS icon
To Next Page
Loading...
