4. ROUTES
4-6
Route Edit screen pop-up menu
Tap a point or the point number on the left list. The point number is highlighted for the
selected point and the pop-up menu appears.
[Add]: Add or insert a point in the route.
[Delete]: Delete the selected point.
[Skip]: Skip the selected point. [Unskip] is displayed when you tap the point to be
skipped. Tap [Unskip] to cancel skipping.
[Coord Type]: Select the position display format for points globally, among [ddd
mm.mmm], [ddd mm.mmmm] and [ddd mm ss].
[Connect]: Connect a route to the last point of the route selected for editing. See
section 4.7.
4.4 How to Move a Point in a Route on the Screen
You can move a point in a route on the screen as follows.
1. Tap the point you want to move to show the pop-up menu and tap [Move].
2. Tap the plotter display to scroll if necessary.
3. Long tap the place where you want to move the point.
4.5 How to Skip a Point in a Route on the Screen
Unnecessary points in a route on the screen can be skipped. You can also delete a
route point from the pop-up menu from the [Route Edit] screen. See section 4.3.2.
Tap the point you want to skip to show the pop-up menu and tap [Skip]. [Unskip] is
displayed when you tap the point to be skipped. Tap [Unskip] to cancel skipping.
To Next Page
Loading...
