Furuno PP-520 - Specifications

FURUNO PP-520
SP - 1 E5080S02C
120906
SPECIFICATIONS OF PRINTER
PP-520
1 GENERAL
1.1 Printing system Serial impact dot matrix
1.2 Printing head 9 pins
1.3 Printing speed Draft: 200 characters/second
1.4 Type of paper 8.5-inch roll paper
Width 208 to 216 mm
Thickness 0.07 to 0.09 mm
Maximum roll diameter 128 mm
Inside diameter of core 25.4 mm (1 inch)
1.5 Paper advance Friction feed
1.6 Pitch of carriage return 4.23 mm (1/6-inch)
1.7 Data buffer 64 Kbyte
1.8 Ribbon Fabric ribbon cartridge (black)
1.9 Interface Parallel interface (centronics)
1.10 Control code IBM2380Plus Emulation, ESC/P mode
1.11 Noise Less than 59 dB
1.12 Protective function Reverse current, over-voltage/current protection
2 POWER SUPPLY
24 VDC: 1 A
(25 W at continuous printing, 3.4 W at ST-BY)
3 ENVIRONMENTAL CONDITIONS
3.1 Ambient temperature 5°C to +35°C (storage: -25°C to +55°C)
3.2 Relative humidity 20% to 60% (no dew condensation)
3.3 Degree of protection IPX0
3.4 Vibration 0.25G, 10 to 55 Hz (storage: 0.50G, 10 to 55 Hz)