2. INSTALLATION
7
2.5 How to Set the Ink Ribbon Cartridge
Replace the cartridge when the ink runs out. (Type: 7Q1VP80SF, Code No.: 001-198-190-10)
1. Turn off the power and remove the printer cover.
2. Confirm that the printing head is at the center of the printing mechanism. Take out the ink rib-
bon cartridge.
3. Take out the new ribbon cartridge from its bag. Turn the ribbon feed knob in the direction of
the arrow to remove slack in the ribbon.
4. Insert the ribbon between the ribbon mask and the printing head, and position the cartridge
so that the hole under the ribbon feed knob is inserted into the shaft.
Press the edge of the cartridge lightly to fasten it securely.
5. Manually move the printing head back and forth along the carriage bar to make sure the ribbon
feed knob rotates in the direction of the arrow.
Confirm that the ribbon moves freely. If the ribbon has slack, rotate the ribbon feed knob to
remove the slack.
6. Replace the printer cover and turn on the power switch.
WARNING
The printing head is hot after
printing. Do not touch it.
Burn can result.
To Next Page
Loading...
