1. OPERATION
1-7
1.3.2 Controls
1.3.3 How to adjust the brilliance of the LCD and keys
1. Press the BRILL key to show the [BRILL] setting window.
2. To adjust the brilliance, use the cursorpad; or for the LCD, or for the
keys.
3. Press the ENT or MENU/ESC key to close the setting window.
Control Function
BRILL
Short press: Displays the [BRILL] setting window.
Long press: Restores the brilliance of the LCD and keys to
default.
ACK
BAM mode: Not used.
Legacy mode: Acknowledge an alert to stop the flashing of
the alert list and silence the alert buzzer.
TEST
Opens the test menu.
Extract
Extracts the recorded data to the external media.
MENU/ESC
Short press: Opens/closes the menu, returns one layer in
menu operation.
Long press: When one ore more alerts are active, opens the
alert list. When no active alert exists, returns to the base
screen except in pop-up displays (e.g. key beep, extraction re-
lated, etc.) and tests.
ENT
• Confirms a selection.
• Legacy mode only: Silences the alert buzzer temporarily
when there are unacknowledged alerts. (The alert buzzer
sounds again in 30 seconds after the buzzer stops.)
Cursorpad
Short press: Selects a menu item, switches the page, adjusts
the brilliance of the LCD and keys when the [BRILL] setting
window opens.
Long press: Moves the cursor continuously.
BRILL
ENT
MENU
ESC
TEST
Extract
ACK
BRILL
TEST
Extract
Setting ranges: 0 to 7
Defaults: 5
BRILL
LCD Min
Min
Max
MaxKe
y
5
5
◄
►
▼
▲
To Next Page
Loading...
