EasyManua.ls Logo

Furuno VR-7000 - Foreword; Introduction; Parts and equipment needed; Trademarks

Furuno VR-7000
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY INSTRUCTIONS
iii
CAUTION
Do not:
- use batteries of different capacities
- mix old batteries with new
- mix batteries of different makes
The battery of the DCU and Float-free
DRU have multiple cells. Batteries
themselves may become damaged or
damage to electrical parts may result.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING LABELS
Warning labels are attached to the DCU.
Do not remove the labels. If the label is missing or damaged, contact a FURUNO agent or
dealer about replacement.
Name: Warning Label 1
Type: 86-003-1011-3
Code No.: 100-236-233-10
About the TFT LCD
The TFT LCD is constructed using the latest LCD techniques, and displays
99.99% of its pixels. The remaining 0.01% of the pixels may drop out or
blink, however this is not an indication of malfunction.
Do not connect/disconnect the cable
while turning the power on.
The unit may be damaged.
WARNING
Do not wet the capsule of the
Float-free DRU.
The wetted capsule may
accidentally transmit a signal.
Do not approach the antenna of
the Float-free DRU.
The antenna of the Float-free DRU
emits electromagnetic radio
frequency (RF) that can be harmful
to the human body. Distance at
which RF radiation level of 100 and
10 W/m
2
are given in the table
below.
100W/m
2
10W/m
2
0.16m
0.48m
IEC60945
IEC60945
RF power density Distance
Description
required by

Other manuals for Furuno VR-7000

Related product manuals