EasyManua.ls Logo

Fusion MS-IP700i

Fusion MS-IP700i
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
PREPARING FOR AUXILIARY INPUT
Connecting auxiliary device
Connect the auxiliary device to the AUX
INcable(WhiteandRedRCAsockets)
at the rear of the 700 Series.
Auxiliary Rewind Fast
Forward
BLUETOOTH MEDIA DEVICE.
MS-AV700i and MS-IP700i Models
The external MS-BT200 Bluetooth module is
designed to provide Bluetooth audio streaming
from a compatible smartphone or media player
directly to your FUSION marine stereo. The
MS-BT200isconnectedtotheSatelliteRadio
connector of your stereo.
Note: The MS-BT200 cannot be operated
simultaneouslywithaSatelliteRadioreceiver.
For installations where the Satellite
RadiosocketisnotavailabletheFUSION
MS-BT100 audio onlyBluetooth module
is recommended.
TheMS-BT200supportscontrol(Play/Pause/Next/Back)ofthemediadevice
from the FUSION Stereo. Song information such as song title, artist name and
duration are displayed, depending on the capability of your phone and music
application.
TheMS-BT200doesNOTprovidephonecallcontrol.Handsfreeoperationofthe
phone is not supported from the FUSION stereo.
ENABLE BLUETOOTH SOURCE
If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner (USA
Only)youwillneedtoenablethesource.Thisoperationwillbedeterminedbythe
Tuner region you have selected.
Tuner Region - USA
When USA Tuner region is selected, press the menu button and select
Settings>Sources>AccessorythenselectthesourcetoenableSiriusXMor
Bluetooth.
Tuner Region - Australasia-Europe-Japan
In these Tuner regions once the MS-BT200 is installed and connected the source
will be available.

Other manuals for Fusion MS-IP700i

Related product manuals