Fusion MS-IP700i

50
To lock or unlock a channel:
1. Press the Menu key.
2. (ifrequired)turnandthenpresstheEncodertoselectParental > Unlock.
Enteryouraccesscode.
3. Select the Lock/Unlock menu item.
4. TurntheEncodertohighlightachannelthenpresstheEncoderto
lock()orunlock()thechannel,asrequired.
5. PresstheMenukey(orleavetotimeout)toexit.
ADVANCED SETTINGS
The settings described in this section are usually set up when the unit is
installed and not changed again.
Sub filter
Usethesubltersettingtocontrolthesub-woofercutofffrequency.Audio
signalsabovetheselectedfrequencywillnotbepassedontothesub-woofer.
The sub filter settings apply to all sub-woofer outputs.
Menu key Rotary
Encoder