FUTABA 12K - Page 43

43
<Basic Operation>
If the receiver's voltage does not display on the transmitter
◆ Whenthereceiverhasthetransmitter'sIDinmemory,alinkisestablishedandnormal
operationisallowed.
◆ Whenthetransmitterhasthereceiver'sIDinmemory,alinkisestablishedand
telemetryfunctionsareusable.
ThetransmitterstoresreceiverIDsbymodel;thus,ifitdoesnothaveaparticular
receivermodelIDstoredinmemoryorhasadifferentreceiverIDstored,telemetry
functionswillbeunusable.However,thedeviceisoperableaslongasthereceiverhas
thetransmitter'sIDstoredinmemory.
Whensettingupanewmodel,beforeusingit,first
establishalinkwiththereceiverthatwillbeused
withit.
Link
Operable
TxID:xxxxxx2
stored
Telemetryusable
Telemetryusable
ReceiverID:xxxxxx1
storedforModel1
Linkofmodel1
TransmitterswitchedtoModel2and
linkreestablished
BecausereceiverIDswillbestored
inthememoryofeachtransmitter
model,itisunnecessaryto
reestablishalinkoncethereceiver
IDhasbeenstoredinmemoryfor
agivenmodel.
Deviceisoperableifreceiver
hastransmitter'sIDstoredin
memory
Telemetryfunctionsunusablebecause
Model2doesnothavereceiver'sID
storedinmemory.
TxID:xxxxxx2
stored
RxID:xxxxxx1TxID:xxxxxx2
Link
RxID:xxxxxx1
RxID:xxxxxx1
Model1:ReceiverID:xxxxxx1
Model2:ReceiverID:---------
Model3:ReceiverID:---------
Model1:ReceiverID:xxxxxx1
Model2:ReceiverID:---------
Model3:ReceiverID:---------
Model1:ReceiverID:xxxxxx1
Model2:ReceiverID:xxxxxx1
Model3:ReceiverID:---------
Model1→ Model2