FUTABA 2PC - Reference; Ratings

1515
1515
15
Reference
2PC / 2PCKA
Reference
Ratings
Transmitter T2PC / T2PCKA
(2 channels, AM transmitter)
Transmitting frequency:
27, 29, 40, 41, 72 or 75 MHz
Modulation method: AM
Power requirement:
12V (penlight battery X 8)
Current drain: 250mA
Receiver R122JE
(2 channels, AM receiver)
Receiving frequency:
27, 29, 40, 41, 72 or 75 MHz
Intermediate frequency: 455kHz
Power requirement: 4.8 - 8.4V
Current drain: 30mA (at 4.8V / No signal)
Size: 47.2X33.3X17.3mm
Weight: 16.6g
Servo S3003
(standard servo)
Power requirement:
4.8V or 6V (common with receiver)
Current drain: 8mA (at 6V / Idle)
Output torque: 3.2kg-cm (at 4.8V)
Operating speed: 0.23sec/60 digree (at 4.8V)
Size: 40.4x19.8x36mm
Weight: 37.2g
E.S.C. MC210CB / MC310CB
(Electronic speed control)
Voltage drop (at 20A):
Approximately 0.52V (210)
Approximately 0.41V (310)
(Between input and output)
Maximum current: 30A (210) , 35A (310)
(Fuse capacity)
Power requirement: 7.2 to 8.4V
Regulator output: 6V/3A Max(210)
6V/1A Max at 7.2V(310)
6V/0.5A Max at 8.4V(310)
Size: 45.5X41.5X26.0mm
Weight: 72.5g (210), 78g (310)
*Specifications and ratings are subject to change without prior notice.