22
22
2
Safety Precautions
For your safety as well as that of others. Please read this manual thoroughly prior to instal-
lation and operation of your digital proportional R/C system.
Definition Of Symbols
The following defines the symbols used in this manual.
Explanation Of Symbols
Warning
Indicates a procedure that could result in serious injury or death to the user
or other persons if ignored and not performed properly.
Caution
Indicates a procedure that may result in serious injury to the user or other
persons, as well as physical damage. If ignored and not performed properly.
Safety Precautions
2PC / 2PCKA
Explanation Of Graphic Symbols
Indicates an operation that prompts a warning (including Caution).
Indicates an operation that must not be performed.
Indicates an operation that always must be performed.
Caution
(When using a Ni-cad battery to power your system)
When the charger is not in use, disconnect from the outlet.
To prevent accidents, overheating and short circuits
Running (Sailing) Preparations Safety Precautions
Warning
(When using a Ni-cad battery to power your system)
Charging
When using a Ni-cad battery to power your system, always charge and check the
battery voltage prior to operation.
Should the battery discharge below the minimum voltage level, control will be lost.
To Next Page
Loading...
Need help?
General
