FUTABA FP-7UAF - Flap to Elevator Mixing (6-2)

• FUNCTION AND DATA SETTING
Press the [MODE SELECT]
To normal display mode
Activate/inhibit mode setting
Set the mode with the
keys.
+ : Activate
-: Inhibit
Elevator servo throw setting
Set the flashing display to the
channel 2
with the
keys.
Set the rate with the
keys.
(When the + and — keys are
pressed simultaneously, 0% is
set.)
Flap servo throw setting
Set the flashing display to chan-
nel 6
with the
keys.
Set the throw with the
keys.
(When the + and — keys are
pressed simultaneously, 0% is
set.)
ToSNP
OFF side
ON side
• The operating position of the
elevator and flap servos can be
set.
(INH: Inhibit state)
Use this mixing when an air brake
is necessary when landing or diving,
etc. during flight.
6-2
FLAP -> ELEVATOR MIXING
-14 -