FUTABA FP-7UAF - Aileron Differential (DIFF)

• FUNCTION AND DATA SETTING
Pressthe (MODE SELECT]
keys simultaneously
To normal display mode
Activate/inhibit mode setting
Set the mode with the
keys.
+ : Activate
-: Inhibit
Set the CH1 servo direction of operation.
Set the flashing display to "+"
or "—" with the
keys.
Held as long as the aileron
is at the right.
(Channel 1 side selected.)
Set the direction of operation
with the
keys.
+ : Normal direction
—: Reverse direction
CH7 servo direction of operation setting
Held as long
as the aileron
is at the left.
Set the direction of operation
with the
keys.
+ : Normal direction
—: Reverse direction
CH1 servo throw setting
Set the flashing display to "%"
with the
keys.
Held as lonq as the aileron
is at the riqht.
Set the rate with the
keys.
(When the + and — keys are
pressed simultaneously, 100% is
set.)
CH7 servo throw setting
Held as long as the aileron
is at the left.
Set the rate with the
keys.
(When the + and — keys are
pressed simultaneously, 100% is
set.)
To FLPR
•AIL DIFF AND FLAPERON can-
not be on simultaneously. The
function turned on last has priori-
ty.
A left and right differential can be
applied to the ailerons. This is ef-
fective in roll axis correction. (Left
and right aileron servos are neces-
sary.)
• The operating channels are CH1
and CH7.
DIFF
AILERON DIFFERENTIAL
(INH: Inhibit state)
(ON: Activate state)
— 16 -