FUTABA T16IZ SUPER - Version 2.0 Receiver;Gyro Updates; Receiver and Gyro Update Procedure; Updating Receiver and Gyro Firmware

④ Tap[Read].
⑤ Thereceiversettingswillbedisplayed.Thedisplayedcontentsvarydependingonthemodel.
⑦ Tap[Write].→ Receiversettingswillbechanged.
⑥ Makethenecessaryreceiver
settings.
⑧ Removethereceiverfromthetransmitter.
Changingreceiverchanneloutputmode
MODEA → MODEB → MODEC・・・MODEA
DualRXlinkmode
[OFF ⇔ ON]
[INH：TelemetryON]
[ACT：TelemetryOFF]
*T16IZScannotoperateafter17ch.