24
Before Using
Removing the steering wheel unit
1. After removing the wheel cap,
carefully remove the screw
holding the steering wheel.
2. Remove the steering wheel.
3. Remove the 4 screws from
the wheel unit cover.
4. Remove the wheel unit cover.
Be very careful the wheel
shaft will fall out.
5. Remove the 4 screws from
the wheel unit.
6. Disconnect the wheel unit
connector.
Steering Wheel
Wheel Unit
Cover
Wheel Unit
screw (large)
x1
screw (small)
x4
screw (middle)
x4
To Next Page
Loading...
