FUTABA T4PM

(END POINT screen)
(HOME screen)
MENU-2
MENU-3
MENU-4
(MENU 1 )
Select
"END POINT"
48
Function
Setting item selection
(Steering and Throttle direction)
- The direction (STR LFT and STR RGT) linked with the steering wheel is switched.
- The direction (THR FWD and THR BRK) linked with the throttle trigger is switched.
Setting item (channel and direction)
STR LFT: Steering (left side)
STR RGT: Steering (right side)
THR FWD: Throttle (foward side)
THR BRK: Throttle (brake side)
CH3/CH4 UP: 3rd or 4th channel (up side)
CH3/CH4 DWN: 3rd or 4th channel (down side)
(HOME screen)
100
End Point Adjuster "END POINT"
(Preparation)
- Before setup of the steering end point adjustment (END
POINT), set the steering D/R trim (initial setup: DT4) to the
maximum steering angle position 100%.
- Use the (JOG) button to select the setting item "RGT" and
make the following adjustments: and make the following ad-
justments: Or turn the steering wheel to select LFT or RGT.
1
Steering (left side) adjustment
Turn the steering wheel fully to the left and use
the (+) or (-) buttons to adjust the steering an-
gle.
2
Steering (right side) adjustment
Turn the steering wheel fully to the right and use
the (+) or (-) buttons to adjust the steering angle.
Steering (END POINT) adjustment
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Steering END POINT
STR LFT: 0~120
STR RGT: 0~120
Initial value: 100
3
When finished with the setting, return to the MENU screen
by pressing the (END) button.
Display to
"
(1'32,17
"
VFUHHQXVLQJWKHIROORZLQJPHWKRG