G-Lab MIDI Guitar Controller - Setup; MIDI INPUT Channel Number Programming

8
SETUP
Setup features the following parameters and functions:
- Cin - MIDI input channel number,
- Co1 - MIDI Program Change – 1 channel number,
- Co2 - MIDI Program Change – 2 channel number,
- Co3 - MIDI Program Change – 3 channel number
- Co4 - Control Change channel number
- Cno - CC Controller’s number,
- nio - MIDI output mode
- bdP - Bulk memory dump
- rdP - Memory dump permission
- CEE - Clearing of the presets’ memory
MIDI INPUT channel number programming
The channel number on which MGC-6 receive the Program Change and Control Change commands is
programmable on the Cin position. The available range is from 1 to 16.