19
EMC/EMI & Certificate of conformity
EMC/EMI
This device has been designed and manufactured to conform with directives and standards in the field of
safety operations and electromagnetic interference.
This device uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However in spite of performing
below standards there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception which can be determined by turning
the device on and off, the user is encouraged to try to correct the interference by one or more of the
following operations:
– Reorient or relocate the receiving antenna.
– Increase the separation between the device and receiver.
– Connect the device into an outlet on a circuit different from that to which the receiver is connected.
– Contact with the manufacturer (see: Before calling a service).
– Consult the dealer for help.
Certificate of Conformity
ELZAB S.A., ul. Kruczkowskiego 39, 41-813 Zabrze, Poland,
hereby declares on own responsibility that the following product:
MGC-6 MIDI Guitar Controller (G LAB MGC-6)
that is covered by this certificate and marked with CE 07 label conforms with following standards:
PN-EN 60065:2004
Safety requirements for mains operated electronic and related
apparatus for household and similar general use
PN-EN 55103-1:1998
Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
Part 1: Emission.
PN-EN 55103-2:1998
Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
Part 2: Immunity.
With reference to regulations in following directives:
73/23/EEC, 2004/108/EEC
Issued in Zabrze, October 2008
Jerzy Biernat
President of the ELZAB S.A. Board of Directors
To Next Page
Loading...