BLUETOOTH WIRELESS SPEAKER
LINE-IN PLAYBACK
You can also play audio from other Line-In / Line-In digital sources using a standard
3.5mm Line-In audio cable (sold separately).
1 Press the POWER ON/OFF button to turn on G-MEGA .
2 Insert one end of the 3.5mm audio cable into the Line-In jack on the rear of
G-MEGA and other end into the Line-Out or headphone jack of your audio device
(e.g. iPad, mobile phone, MP3 player, digital media player, etc.)
3 Press the LINE-IN button to switch to LINE IN mode. LINE IN LED indicator
will illuminate green and audio from your device will play through G-MEGA.
NOTE: For best audio performance and minimal distortion, avoid turning the volume all the way
up on your external audio source.
To Next Page
Loading...
