G-project G-MEGA - Bluetooth Operation; Pairing and Connecting a Device

BLUETOOTH OPERATION
You can stream audio wirelessly to G-MEGA from up to 33’ away using your
iPhone, iPad, iPod, Android, laptop, or other A2DP Bluetooth enabled device.
1 Press the POWER ON/OFF button to turn on G-MEGA .
2 Then press the BLUETOOTH PAIR button. The LED Bluetooth indicator
and LED lighting logo will ash blue.
3 Turn on your compatible A2DP Bluetooth device and enable Bluetooth.
4 Search for Bluetooth devices and select “G-MEGA ”.
5 The blue Bluetooth LED indicator and LED lighting logo will change from
ashing to solid, indicating that your Bluetooth device is connected to G-MEGA.
NOTES:
• Press and hold the Bluetooth PAIR button for 3 seconds to disconnect the current
Bluetooth connection.
• The unit will return to pairing mode and the Bluetooth LED indicator and LED lighting logo
will ash blue.
• If asked for a password, enter “0000”.