GAC MOTOR All New GS8 - Page 74

68
4. Operation of systems and equipment
- If the button
①
is pulled up to the first
stop position, the power window will
be lifted for closing until the button is
released or the window reaches the
highest position.
- If the button
①
is pulled up to the limit
position, the power window will be lifted
automatically for closing until the window
reaches the highest position.
- If the button
①
is pressed down to the
rststopposition,thepowerwindowwill
be lowered for opening until the button
is released or the window reaches the
lowest position.
- If the button
①
is pressed down to the
limit position, the power window will be
lowered automatically for opening until the
window reaches the lowest position.
NOTE
● Ifyouwanttostopthewindowduring
the automatic lifting or lowering, just
press down/pull up the button
①
.
● Theoperationmethodsofthebuttons
②
,
③
and
④
are the same as that of
the button
①
, only corresponding to the
respective windows.
- If you press the passenger’s window
lock button
⑤
, the button indicator lamp
will come on and the passenger’s power
windows cannot be operated anymore. If
you press this button again, this function
will be deactivated and the button
indicator lamp will go out.
Passenger’s power window control button
- For the operation methods of the
passenger’s power window control button
①
, please refer to the driver’s power
window control button.
Initialization of anti-pinch function
If the express-up function is not available, or
the anti-pinch function fails, or the initialization
becomes invalid automatically because the
anti-pinch function is triggered multiple times
in a short period of time, the power window
needs to be initialized again.
1. Pull up the power window control button,
and then the window is lifted in steps until
it is completely closed.
2. After the window is completely
closed, continue to pull up the power
window control button for about 1 s for
initialization.
WARNING
● Ifthewindowhasnoanti-pinch
function during the initialization
learning process, please do not
use any part of your body or other
objects to hinder the closing of
the window, otherwise it will cause
personal injury and affect the result
of the initialization learning.
● Ifthe powerwindowsystem
fails, please go to the GAC Motor
authorized shop for inspection in
time.