5 5
3E4677 Gallagher S200 Solar Energizer User Manual
English
• Electric animal fences intended for deterring birds, household pet containment or training animals such as
cows need only be supplied from low output energizers to obtain sasfactory and safe performance.
• In electric animal fences intended for deterring birds from roosng on buildings, no electric fence wire shall
be connected to an earth stake. A warning sign shall be ed to every point where persons may gain ready
access to the conductors.
• Where an electric animal fence crosses a public pathway, a non-electried gate shall be incorporated in the
electric animal fence at that point or a crossing by means of sles shall be provided. At any such crossing, the
adjacent electried wires shall carry warning signs.
• Any part of an electric animal fence that is installed along a public road or pathway shall be idened by
electric fence warning signs (G6020) at regular intervals that are securely fastened to the fence posts or rmly
clamped to the fence wires.
• The size of the warning sign shall be at least 100mm x 200mm.
• The background colour of both sides of the warning sign shall be yellow. The
inscripon on the sign shall be black and shall be either:
- the substance of “CAUTION: Electric Fence” or,
- the symbol shown:
• The inscripon shall be indelible, inscribed on both sides of the warning sign and have
a height of at least 25mm.
• Ensure that all mains operated, ancillary equipment connected to the electric animal fence circuit provides
a degree of isolaon between the fence circuit and the supply mains equivalent to that provided by the
energizer.
• Protecon from the weather shall be provided for the ancillary equipment unless this equipment is cered
by the manufacturer as being suitable for use outdoors, and is of a type with a minimum degree of protecon
IPX4.
This energizer complies with internaonal safety regulaons and is manufactured to internaonal standards.
Gallagher reserves the right to make changes without noce to any product specicaon to improve reliability,
funcon or design. E & OE.
The author thanks the Internaonal Electrotechnical Commission (IEC) for permission to reproduce Informaon from its
Internaonal Publicaon 60335-2-76 ed.2.2 (2013). Annex BB-1.All such extracts are copyright of IEC, Geneva, Switzerland.
All rights reserved. Further informaon on the IEC is available from www.iec.ch. IEC has no responsibility for the placement
and context in which the extracts and contents are reproduced by the author, nor is IEC in any way responsible for the other
content or accuracy therein.