G&D DVI-CPU - Computer Module DVI-CPU-Fiber

Computer module »DVI-CPU-Fiber«
24 · Computer and console modules
Computer module »DVI-CPU-Fiber«
With DVI-CPU-Fiber computer modules, you can connect a computer with DVI graphics
output to a digital matrix switch of the ControlCenter-Compact or ControlCenter-Digital
series.
At the consoles of both matrix switches, users can access a computer module to
operate the connected computer.
Package contents
 1 × Computer module DVI-CPU-Fiber
 1 × Video cable (DVI-D-DL)
 1 × USB device cable
 2 × Audio cable
 1 × Power pack (12V/2A, only with variants incl. PowerPack)
 1 × Power cable (only with variants incl. PowerPack)
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
Required accessories
 1 × Compatible optical fibre cable to connect the computer module to
the matrix switch or compatible console module
NOTE: This computer module can only be connected to a compatible fiber port of
ControlCenter-Compact matrix switches or ControlCenter-Digital matrix switches
(requires CCD-I/O 16-Card-Fiber).
IMPORTANT: Both, the computer module and the fiber ports are available as single-
mode variants or as multimode variants. Make sure that the port at the computer
module, the fiber port and the optical fibers are compatible with each other.
ADVICE: You can also connect the computer module directly to a compatible console
module.