G&D DVI-CPU - Computer Module DP-CPU-UC

Computer module »DP-CPU-UC«
62 · Computer and console modules
Computer module »DP-CPU-UC«
With DP-CPU-UC computer modules, you can connect computers with DisplayPort
graphics output to two different matrix switches of the ControlCenter-Compact
or
ControlCenter-Digital series.
The module uses the VESA DisplayPort DualMode standard 1.1.
Users at consoles of both matrix switches can access the computer module to operate
the connected computer.
Package contents
 1 × Computer module DP-CPU-UC
 1 × DisplayPort video cable (DP-Cable-M/M-2)
 1 × USB device cable
 2 × Audio cable
 1 × Power pack (12V/2A, only with variants incl. PowerPack)
 1 × Power cable (only with variants incl. PowerPack)
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
Required accessories
 2 × Category 5e (or better) twisted pair cables to connect the computer module to
two different matrix switches or compatible console modules
IMPORTANT: For correct operation, the computer also needs to support the
DualMode standard (often marked with DP++).
ADVICE: You can also connect the computer module directly to up to two compatible
console modules.
ADVICE: You can also connect the computer module directly to up to two compatible
console modules.
DP++ CPU