Computer module »DP-CPU-UC«
Computer and console modules · 63
Installation
Connecting the computer
Keyb.: Use the purple plug of an optional Twin-PS/2 cable to connect the computer’s
PS/2 keyboard interface to this interface.
Mouse: Use the green plug of an optional Twin-PS/2 cable to connect the computer’s
PS/2 mouse interface to this interface.
USB K/M: Use the USB device cable to connect one of the computer’s USB interfaces
to this interface.
DP++ CPU: Connect the computer’s Display Port DualMode digital video output to this
interface.
Line In: Use one of the supplied audio cables to connect the computer’s Line Out
interface to this interface.
Line Out: Use one of the supplied audio cables to connect the computer’s Line In inter-
face to this interface.
Connections to the matrix switches
NOTE:
Keyboard and mouse signals can be transmitted to the computer using either
the PS/2 interfaces or the USB interface.
IMPORTANT:
Connect only one of the computer module’s Trans. interfaces for
each matrix switch!
NOTE:
Use only category 5e (or better) twisted pair cables to connect the devices.
MouseKeyb.
USB K/M
DP++ CPU
To Next Page
Loading...
