G&D DVI-CPU User Manual

Console module »DVI-CON-Fiber«
128 · Computer and console modules
Console module »DVI-CON-Fiber«
With DVI-CON-Fibre console modules, you can use optical fibres to connect a console
(
DVI monitor, keyboard, mouse and audio devices) to the matrix switch of
the
ControlCenter-Compact or ControlCenter-Digital series
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
Package contents
 1 × Console module DVI-CON-Fiber
 1 × Power cable
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
Required accessories
 1 × Compatible optical fibre cable to connect the console module to
the matrix switch or a compatible computer module
NOTE: This console module can be connected to a compatible fiber port of
ControlCenter-Compact matrix switches or ControlCenter-Digital matrix switches
(requires CCD-I/O 16-Card-Fiber).
IMPORTANT: Both, the console module and the fiber ports are available as single-
mode variants or as multimode variants. Make sure that the port at the console module,
the fiber port and the optical fibers are compatible with each other.
ADVICE: You can also connect the console module directly to a compatible computer
module.

G&D DVI-CPU Specifications

General

Brand	G&D
Model	DVI-CPU
Category	Control Unit
Language	English